Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake and Clutch Levers on Husqvarna FE 501

Model: Husqvarna Fe 501
Part:

Video tutorial

In today's video, you will see step-by-step instructions to remove and replace the brake and clutch levers on a Husqvarna FE 501. First, start by removing the old levers; to do this, unscrew the bolt on the clutch lever using an 8 mm socket to hold the lower nut. At this point, apply grease to the new lever before remounting it. Move on to the brake lever, which you will remove in exactly the same way as the clutch lever; it is advisable to install good levers that allow for a long travel.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Replace the Levers on a Husqvarna FE 501?
How to Replace the Levers on a Husqvarna FE 501?
Fe 501 To replace the levers on a Husqvarna FE 501, loosen the nuts that secure the pivot pins of the levers, which fix them to the side housings of the han…
How to Replace the Engine Oil of the Husqvarna FE 501
How to Replace the Engine Oil of the Husqvarna FE 501
Fe 501 Discover the instructions for performing the routine maintenance service by replacing the engine oil and oil filter of the Husqvarna FE 501 motorcycl…
How to Replace the Front Headlight on the Husqvarna FE 501
How to Replace the Front Headlight on the Husqvarna FE 501
Fe 501 In today's tutorial, you will learn how to remove and replace the front headlight and its bulb on the Husqvarna FE 501 enduro bike. First, place your…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos