Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake and Clutch Levers on the Ducati Monster 821

Model: Ducati Monster 821
Part:

Video tutorial

In this brief and simple guide, follow the steps to remove and replace the brake and clutch levers on the Ducati Monster 821. First, place your motorcycle on a stand and begin by removing the clutch lever; use a socket spanner to unscrew the pin, as shown in the video.

Next, disconnect the cable from the lever and replace it with the new one. Similarly, unscrew the screw to remove and replace the front brake lever, then adjust the lever's travel!


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Ducati Monster 821
How to Replace the Battery in a Ducati Monster 821
Monster 821 On the Ducati Monster 821, the battery replacement procedure involves loosening the bolts that secure the protective cover of the unit, located insid…
How to Replace the Battery on a Ducati Monster 821?
How to Replace the Battery on a Ducati Monster 821?
Monster 821 To replace the battery on a Ducati Monster 821, loosen the bolts securing the battery cover, located inside the bike just below the rear shock absorb…
How do you replace the engine oil of the Ducati Monster 821?
How do you replace the engine oil of the Ducati Monster 821?
Monster 821 To replace the engine oil of the Ducati Monster 821, you need to loosen the drain plug of the oil pan, which is located at the central lower part of …

How to remove the panels of the Peugeot Kisbee

In this short and simple guide, you will see how to remove the plastic panels of the Peugeot Kisbee scooter, following the instructions provided below. First, place your scooter on the centre stand and begin by lifting the rider's seat; then, unscrew the fixing screws found in the under-seat compartment and under the footboard, subsequently removing the panels as shown in the video. At this point, unscrew the screws of the footboard to remove it, then remove the front shield (disconnecting the electrical connectors as well); finally, reassemble everything by applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos