Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Seat from the Husqvarna Fc 250

Model: Husqvarna Fc 250
Part: Seat

Video tutorial

This guide provides the necessary instructions to remove the rider's seat from the Husqvarna Fc 250 by following these simple steps. First, place your bike on a stand and start by removing the side plastic fairing.

Then, unscrew the fastening screws found on the sides to completely remove the seat, as illustrated in the video. At this point, replace the seat with the new one of the correct type, securing it properly with its screws; then, simply reassemble everything by applying the reverse procedure!


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plug on the Husqvarna FC 250
How to Replace the Spark Plug on the Husqvarna FC 250
Fc 250 This guide shows you how to remove and replace the spark plug on the engine of the Husqvarna FC 250 enduro bike, as well as the FC 350. First, remove…
How to Dismantle the Engine of the Husqvarna FC 250?
How to Dismantle the Engine of the Husqvarna FC 250?
Fc 250 To dismantle the engine of the Husqvarna FC 250, you need to loosen the screws that secure the engine block to its housing. By disconnecting the pipe…
How to Change the Engine Oil of the Husqvarna FC 250
How to Change the Engine Oil of the Husqvarna FC 250
Fc 250 Let's discover how to carry out the routine maintenance service by changing the engine oil and oil filter of the Husqvarna FC 250 enduro bike. First,…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos