Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Engine Oil and Oil Filter on the Husqvarna FC 250

Model: Husqvarna Fc 250
Part: Engine oil

This video is currently unavailable

Today, we will outline the steps for performing routine maintenance by replacing the engine oil and oil filter on the Husqvarna FC 250 enduro bike. First, warm up the engine for a few minutes and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Next, unscrew the oil filter cover, removing and replacing the small cartridge with a new one, as shown in the video. At this point, unscrew the filler cap and pour in the new engine oil, finally checking the level!


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Service (Oil Change) the Husqvarna FC 250
Fc 250 In today's video, you will learn how to perform the routine maintenance service by changing the engine oil and oil filter on a Husqvarna FC 250 endur…
How to Change the Engine Oil of the Husqvarna FC 250
How to Change the Engine Oil of the Husqvarna FC 250
Fc 250 Let's discover how to carry out the routine maintenance service by changing the engine oil and oil filter of the Husqvarna FC 250 enduro bike. First,…
How to Change the Engine Oil in a Husqvarna FC 250
How to Change the Engine Oil in a Husqvarna FC 250
Fc 250 In this tutorial, we will see how to change the engine oil in a Husqvarna FC 250, a very simple and quick operation. First, ensure that the engine is…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos