Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, we will see how to change the engine oil in a Husqvarna FC 250, a very simple and quick operation. First, ensure that the engine is cold enough to operate safely, then position a container underneath the bike, locate the bolts for the two drain holes, and unscrew them using a 13 mm socket. Allow all the oil in the system to drain out, then remove the secondary filter and clean it of any dirt residue. At this point, simply open the main filter cap with an 8 mm key, insert the replacement, reassemble everything, and pour in the necessary amount of oil through the designated upper hole.

Posted on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fc 250 In today's video, you will learn how to perform the routine maintenance service by changing the engine oil and oil filter on a Husqvarna FC 250 endur…
Fc 250 Let's discover how to carry out the routine maintenance service by changing the engine oil and oil filter of the Husqvarna FC 250 enduro bike. First,…
Fc 250 Today, we will outline the steps for performing routine maintenance by replacing the engine oil and oil filter on the Husqvarna FC 250 enduro bike. F…

How do you reset the Oil Check light on the Sym VF 185?

In order to reset the Oil Check light on the Sym VF 185, you need to turn on the instrument panel by turning the key in the ignition switch. Once the panel is on, you can press and hold the button located at the bottom right of the instrument panel for a few seconds. You will need to continue holding the button for a few seconds and then release it before pressing the next button. This will make the Oil Check light disappear from the instrument panel, and you can turn it off again by turning the key in the opposite direction.

Watch the video!


by ScegliAuto

More videos