Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Husqvarna
    3. :
  3. Fc 350
    4. : How do you replace the oil pump gear on Husqvarna FC 350?

Model: Husqvarna Fc 350
Part: Checks and maintenance
How do you replace the oil pump gear on Husqvarna FC 350?

In order to replace the gear of the oil pump on the Husqvarna FC 350 you have to unscrew the bolts that secure the clutch housing, so that it can be removed to give access to the clutch below. The latter can be completely removed from its housing by unscrewing the bolts that secure it: after the clutch has therefore been removed, it will be possible to access the underlying components, where the corresponding gear will also be found. The latter can be removed and replaced with a new one, fitting all the components previously removed.


Posted on 25 June 2022 by ScegliAuto

Replace the rear brake pads of the Triumph Speed Triple

We see in this video the main instructions to remove and replace the rear brake pads of the Triumph Speed Triple. First of all we lift our rear wheel, putting on the stand, and we begin to unscrew the fixing screws of the rear brake caliper, using a socket wrench; after which we remove the old pads that we find inside the caliper, as shown in the video. At this point we leverage the calliper piston, making it retract; let's clean up the dirt and install the new pads, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos