Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain on the Husqvarna SMS 630?

Model: Husqvarna Sms 630
Part: Checks and maintenance

Video tutorial

To replace the timing chain on the Husqvarna SMS 630, loosen the protective cover located on the left side of the bike, just below the exhaust manifold. Once this cover is removed, you will be able to access the underlying timing chain, which must be removed from the appropriate sprockets so that it can be replaced with a new spare part.

After the replacement, check that the new chain has been fitted correctly, and then refit the engine side cover.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Discs on a Husqvarna SMS 125?
How to Replace the Clutch Discs on a Husqvarna SMS 125?
Sms 125 To replace the clutch discs on the Husqvarna SMS 125, first drain the cooling system by unscrewing the drain plug and then remove the associated hose…
How to Replace the Front Headlight on a Husqvarna Te 300i
How to Replace the Front Headlight on a Husqvarna Te 300i
Te 300i In this short and simple guide, learn how to remove and replace the front headlight or its dipped beam bulb on the Husqvarna Te 300i enduro bike. Fir…
How to Replace the Timing Chain on a Seat Ibiza
How to Replace the Timing Chain on a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Start by unclipping and removing the upper engine cover of your Seat Ibiza. Once done, unclip and remove the cover for the auxiliary belt and timing …

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos