Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Discs on a Husqvarna SMS 125?

Model: Husqvarna Sms 125
Part: Clutch

Video tutorial

To replace the clutch discs on the Husqvarna SMS 125, first drain the cooling system by unscrewing the drain plug and then remove the associated hose. Next, open the oil pump cover and remove the two tubes inside the cover.

Now, you can open the clutch cover, which will require removing the central pin and loosening the five bolts underneath the springs. This will allow you to extract all the discs and replace them.

Finally, reassemble all the parts removed earlier.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Discs on a Husqvarna TE 300i
How to Replace the Clutch Discs on a Husqvarna TE 300i
Te 300i In this video tutorial, learn how to remove and replace the clutch discs on the Husqvarna TE 300i enduro bike, following the instructions below. Firs…
How to Replace the Clutch Discs on the Husqvarna TE 300
How to Replace the Clutch Discs on the Husqvarna TE 300
Te 300i In this short video, we will see the main steps that will allow us to remove and replace the clutch discs on a Husqvarna TE 300 enduro bike. First, r…
How to Replace the Discs on a Husqvarna SM 125?
How to Replace the Discs on a Husqvarna SM 125?
Sm 125 To replace the discs on a Husqvarna SM 125, start by removing the front wheel by unscrewing the bolts at the bottom of the forks and the nut holding …

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos