Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Husqvarna
    3. :
  3. Te 300i
    4. : How to replace the clutch plates on Husqvarna TE 300

Model: Husqvarna Te 300i
Part: Clutch
How to replace the clutch plates on Husqvarna TE 300

Let's see in this short video the main steps that will allow us to disassemble and replace the clutch plates on a Husqvarna TE 300 enduro motorcycle. First of all, let's remove any motorcycle protection bulkheads; then proceed with the removal of the crankcase cover, unscrewing the fixing screws. At this point we unscrew the screws of the clutch cover and then those of the clutch pack; we extract the discs one by one, replacing them with new ones and after having placed them in an oil bath for a few hours. Reverse the procedure for reassembly!


Posted on 7 April 2024 by ScegliAuto

How do you change the Benelli TnT 150 engine oil?

The replacement of the Benelli TnT 150 engine oil is carried out by unscrewing the drain plug of the tank containing the oil, located in the lower part of the motorcycle. Once this has been unscrewed, it will be possible to go and place a container under it, so that the oil is completely collected. Then you can close the cap once everything is finished and unscrew the screws that fix the casing on the right side of the bike: under it you will find the oil filter, which must be extracted and replaced. After replacing the filter, it will be possible to top up the oil by inserting the oil in the breather located on the crankcase next to that of the filter.

Watch the video!


by ScegliAuto

More videos