Do it yourself
| ||||
|
Model: Husqvarna Te 300i
In this video tutorial, we will see how to disassemble and replace the clutch discs of the Husqvarna TE 300i enduro motorcycle, following the instructions below. First, we put the motorcycle on the stand and start unscrewing the fastening screws of the transmission housing, in order to remove it. Then, we unscrew the pressure plate screws, subsequently removing all the clutch discs, as shown in the video. At this point, we install the clutch suitable for our engine, tightening the screws in a cross pattern. Finally, we reassemble the clutch housing.
Posted on 11 February 2024 by ScegliAuto
|
How do I remove the fuel tank of a Triumph Tiger 800 XC?In order to remove the tank of the Triumph Tiger 800 XC you must first loosen the screws that are located immediately under the steering wheel. Other screws to loosen will be on the front of the fairing, immediately on the sides and under the headlight. This will allow you to remove the front fairing; then it will be necessary to remove the side fairings, loosening the corresponding bolts and the same operation must be carried out for the saddle. When all these parts have been removed, it will be possible to loosen the screws that secure the tank and remove it from its housing after having disconnected the connectors. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |