Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Transmission Oil on the Husqvarna TE 250

Model: Husqvarna Te 250
Part: Transmission fluid

Video tutorial

Let's change the transmission oil on the Husqvarna TE 250 enduro bike, following the instructions below. First, place the bike on its stand and start by unscrewing the transmission oil drain screw, allowing it to drain into a container for about ten minutes; then clean the drain plug of any metallic residues, as shown in the video.

At this point, unscrew the oil filler cap, top up, and fill to the maximum level; pour in the oil specified in the motorcycle's user and maintenance manual!


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Change the Transmission Oil on a Husqvarna TE 250
How to Change the Transmission Oil on a Husqvarna TE 250
Te 250 .. Discover how to change the transmission oil on the Husqvarna TE 250 enduro bike in simple and quick steps. First,.. …
How to Change the Engine Oil on the Husqvarna TE 250?
How to Change the Engine Oil on the Husqvarna TE 250?
Te 250 You can change the engine oil on the Husqvarna TE 250 by loosening the drain plug located at the central lower part of the vehicle: once this plug is…
How to Replace the Clutch on a Husqvarna TE 250
How to Replace the Clutch on a Husqvarna TE 250
Te 250 To replace the clutch on a Husqvarna TE 250, loosen the screws securing the panel on the side of the bike. This will allow you to detach it and acces…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos