Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Husqvarna
    3. : Vitpilen 701

How to Replace the Brake Pads on a Husqvarna Vitpilen 701?

Model: Husqvarna Vitpilen 701
Part: Brake pads

Video tutorial

To replace the brake pads on a Husqvarna Vitpilen 701, perform the same operation for both the front and rear wheels: loosen the bolts that secure the caliper to its mount so that it can be detached from the disc. This will allow you to remove the pin that holds the pads in their housing, enabling you to insert the new ones: these can then be secured properly within the caliper.

Once the caliper is reattached to the disc, secure it to ensure everything functions correctly.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on a Husqvarna 701 Supermoto
How to Replace the Rear Brake Pads on a Husqvarna 701 Supermoto
701 Sm In this video tutorial, you will learn how to remove and replace the rear brake pads on a Husqvarna 701 Supermoto in simple and quick steps. First, r…
How to Replace the Front Brake Pads on the Husqvarna Vitpilen 125?
How to Replace the Front Brake Pads on the Husqvarna Vitpilen 125?
Vitpilen 125 You can replace the front brake pads on the Husqvarna Vitpilen 125 by loosening the screws that secure the brake caliper to the corresponding disc: o…
How to Replace the Front Brake Pads on a Husqvarna 701?
How to Replace the Front Brake Pads on a Husqvarna 701?
701 Sm To replace the front brake pads on a Husqvarna 701, loosen the bolts that secure the caliper to its housing at the rear of the disc. Once the brake c…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos