Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Genesis
    4. : Car stereo

Hyundai Genesis - Car stereo

Hyundai Genesis (2008-2016 / BH)
Car radio replacement
Removing the car stereo from your car is not that difficult. The guide shows how to proceed to speed up the whole process. In the central dashboard of the car …read all…
Posted on 13 September 2023 by ScegliAuto
Hyundai Genesis (2008-2016 / BH)
How to remove CD radio from the car
To proceed with the removal of the radio as shown in the guide, unscrew the screws in the control panel of the radio and, very gently, be able to extract the …read all…
Posted on 5 August 2023 by ScegliAuto
Hyundai Genesis (2008-2016 / BH)
Removing the navigation screen
This tutorial explains how to access the navigator screen of a Hyundai Genesis to be able to disassemble it. For this operation it will be sufficient to have a …read all…
Posted on 30 July 2023 by ScegliAuto
Hyundai Genesis (2008-2016 / BH)
Removing the cd-rom loader
This video shows us how to remove our cd changer. First we place the gearbox in reverse mode so that we can work better on removal. We proceed to extract the …read all…
Posted on 26 July 2023 by ScegliAuto
Car stereo (4) Battery (1) Key (7) Checks and maintenance (1) Headlight (2) Tail light (1) Air filter (3) Cabin air filter (2) Accessory Kit (1) Rear light bulb (1) Instrument cluster (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos