Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove CD Radio from the Car

Model: Hyundai Genesis BH - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Car stereo

Video tutorial

To remove the car radio as shown in the guide, unscrew the screws located in the radio control panel and gently extract the radio, taking care with the cables. If you then unscrew the two screws of the display frame, it can be removed from the support by disconnecting the wiring connector and unscrewing the two screws that secure it to the frame.

If you wish to install a new radio, simply install the new display in the frame, connect the connector, and position it in the housing, as well as tightening the retaining screws and repositioning the radio panel.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

How to disassemble the Hyundai Genesis car radio
How to disassemble the Hyundai Genesis car radio
Hyundai Genesis (2008-2016 / BH) If the factory car radio inside your Hyundai Genesis is experiencing serious malfunctions and you want to remove it yourself, all you have to do is f…
Replacement of the Car Radio
Replacement of the Car Radio
Hyundai Genesis (2008-2016 / BH) Removing the car radio is not a difficult task. This guide shows how to speed up the entire process. On the central console of the radio, there are f…
Installing LED Lights in Your Car
Installing LED Lights in Your Car
Hyundai Genesis (2008-2016 / BH) The term LED stands for "Light Emitting Diode." Essentially, LEDs are small, inexpensive lights of various colours that can be turned on and off inte…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos