Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Hyundai eON - Battery

Hyundai eON (2011-2019 / MK 1)
How to change the battery on the Hyundai Eon
If we have realized that the battery of our car is dead and we want to proceed to replace it on our own, in the following description we have provided the …read all…
Posted on 2 June 2023 by ScegliAuto
Hyundai eON (2011-2019 / MK 1)
How to replace the Hyundai Eon battery
In this video tutorial we will see the steps on how to disassemble and replace the Hyundai Eon battery, following the instructions below. First of all we open …read all…
Posted on 24 May 2022 by ScegliAuto
Battery (2) Spark plugs (2) Key (1) Checks and maintenance (1) Headlight (1) Tail light (1) Air filter (2) Cabin air filter (4) Clutch (1) Engine oil (1) Brake pads (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos