Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Sonata
    4. : V-belt

Hyundai Sonata - V-belt

Hyundai Sonata (2004-2014 / )
Auxiliary belt replacement instructions
On this model of car, which has a very large engine, the auxiliary belt (or trapezoidal if you prefer) has a length that is truly out of the ordinary and is …read all…
Posted on 9 September 2023 by ScegliAuto
Hyundai Sonata (2004-2014 / )
Auxiliary belt replacement
The replacement of the auxiliary belt is a fairly simple maintenance to carry out but it is absolutely essential to note the passage of the belt between the …read all…
Posted on 28 August 2023 by ScegliAuto
Airbags (1) Alternator (2) Loudspeaker (1) Air conditioning (3) Car stereo (5) Battery (5) Spark plugs (2) Bodywork (2) Key (10) Timing belt (4) V-belt (2) Air conditioning (1) -board computer (2) Checks and maintenance (12) Dashboard (1) Brake discs (1) Headlight (6) Tail light (1) Air filter (3) Cabin air filter (9) Oil filter (2) Accessory Kit (5) Xenon headlight kit (1) Light bulb (4) Headlight bulb (7) Rear light bulb (4) Interior lights ceiling light bulb (3) License plate light (2) Third brake light (1) Handle (1) Engine oil (4) Door panel (4) Front bumper (4) Brake pads (3) Tires (2) Gear Shift Knob (1) Pump (1) Instrument cluster (1) Radiator (2) Wheel (1) Fuse box (4) Seat (1) Outside rearview mirror (2) Windscreen wipers (2) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos