Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Sonata
  6. : Oil filter

Hyundai Sonata - Oil filter

Oil Filter Hyundai Sonata (2004-2014 / )

Hyundai Sonata (2004-2014 / )
Engine Oil and Oil Filter Replacement

If possible, lift the vehicle on a lift or on suitable car ramps to facilitate access to the underside of the vehicle. Then, remove the plastic cap to access …Read all…
Posted on 16 February 2026 by ScegliAuto
Hyundai Sonata (2004-2014 / )
Engine Oil and Oil Filter Replacement

The oil filter is of the cartridge type and is located on the right-hand side of the engine (when viewed from the front), near the hose connecting the air …Read all…
Posted on 11 February 2026 by ScegliAuto

Airbag (1) Alternator (2) Speaker (1) Shocks (1) Antenna (1) Air conditioning (3) Car stereo (5) Battery (6) Spark plugs (2) Body (3) Key (17) Timing belt (4) V-belt (2) Air conditioner (1) Onboard computer (2) Checks and maintenance (9) Dashboard (1) Brake rotors (1) Headlight (7) Tail light (1) Air filter (4) Cabin air filter (14) Oil filter (2) Parking brake (1) Accessory kit (5) Xenon headlight kit (1) Light bulb (4) Headlight bulb (8) Tail light bulb (7) Interior dome light bulb (3) License plate light (3) (2) Handle (2) Engine oil (4) Clock (2) Door trim panel (4) Front bumper (5) Brake pads (3) Tires (2) Shift knob (3) Pump (1) Radiator (2) Wheel (1) Fuse box (18) Seat (3) Side mirror (5) Rearview mirror (1) Warning light – error code (5) (3) Tire pressure warning light (3) Service warning light (27) Fuel cap (2) Windshield wipers (2) Valve (1) Blower motor (1) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos