Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Sonata
    4. : License plate light

Hyundai Sonata - License plate light

Hyundai Sonata (2015-2019 / LF)
How to replace the license plate light bulb on Hyundai Sonata
In our new mini guide dedicated to your Hyundai Sonata (year 2015-2019) we will describe the various steps to carry out if you want to replace the license …read all…
Posted on 23 April 2023 by ScegliAuto
Hyundai Sonata (2004-2014 / )
Taga light replacement instructions
The license plate lights are integrated in the underlying band of the rear bonnet, immediately below the manufacturer's frieze: then unscrew the fixing screws …read all…
Posted on 20 August 2023 by ScegliAuto
Airbags (1) Alternator (2) Loudspeaker (1) Air conditioning (3) Car stereo (5) Battery (5) Spark plugs (2) Bodywork (2) Key (10) Timing belt (4) V-belt (2) Air conditioning (1) -board computer (2) Checks and maintenance (12) Dashboard (1) Brake discs (1) Headlight (6) Tail light (1) Air filter (3) Cabin air filter (9) Oil filter (2) Accessory Kit (5) Xenon headlight kit (1) Light bulb (4) Headlight bulb (7) Rear light bulb (4) Interior lights ceiling light bulb (3) License plate light (2) Third brake light (1) Handle (1) Engine oil (4) Door panel (4) Front bumper (4) Brake pads (3) Tires (2) Gear Shift Knob (1) Pump (1) Instrument cluster (1) Radiator (2) Wheel (1) Fuse box (4) Seat (1) Outside rearview mirror (2) Windscreen wipers (2) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos