Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Original Stereo from a Hyundai I20

Model: Hyundai I20 IB, MK 2, GB - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Car stereo

See other generations:
Video tutorial

Let's see how to remove the original stereo from a Hyundai I20. First, use a plastic lever to remove the air vent panel, then, with a screwdriver, unscrew the securing screws located on the metal tabs at the sides of the stereo until it detaches from the dashboard.

Now, pull the radio out from the dashboard, disconnect the various power connectors located at the back, and the antenna reception cable.

Extract the unit from its housing. To reassemble the various removed parts, proceed in reverse order.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Stereo from a Hyundai i20
How to Remove the Stereo from a Hyundai i20
Hyundai I20 (2014-2021 / IB, MK 2, GB) Want to remove the stereo from your Hyundai but don’t know how? In this video, see how to remove the original stereo from your car. First, remove the…
How to remove the original radio from a Hyundai I20
How to remove the original radio from a Hyundai I20
Hyundai I20 (2014-2021 / IB, MK 2, GB) In this video we see how to disassemble the original radio on a Hyundai I20: we will need plastic spatulas to lever all around the frame of the devic…
Guide to Replacing the Timing Chain on the Hyundai i20
Guide to Replacing the Timing Chain on the Hyundai i20
Hyundai I20 (2014-2021 / IB, MK 2, GB) Below are the necessary instructions on how to dismantle and replace the timing chain on the Hyundai i20. First, open the bonnet and begin removing t…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos