Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stereo from a Hyundai i20

Model: Hyundai I20 IB, MK 2, GB - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Car stereo

See other generations:
Video tutorial

Want to remove the stereo from your Hyundai but don’t know how? In this video, see how to remove the original stereo from your car. First, remove the dashboard cover plastics using a plastic tool, then detach the central frame of the stereo (where the air vents are located) along with the related clips of the control buttons.

Once the stereo is free from constraints, unscrew the fastening screws on its sides.

Pull the stereo out by hand and disconnect the cables (power and antenna). To reassemble, proceed in reverse.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in the Hyundai i20?
How to Replace the Radio in the Hyundai i20?
Hyundai I20 (2014-2021 / IB, MK 2, GB) To replace the radio in the Hyundai i20, use an object to pry off the trim that surrounds the radio and the instrument cluster: once this trim is rem…
How to Reset the Service Light on a Hyundai I20
How to Reset the Service Light on a Hyundai I20
Hyundai I20 (2014-2021 / IB, MK 2, GB) This tutorial shows the procedure to reset the service light on a 2019 Hyundai I20. The procedure is simple and takes little time to complete. To res…
How to adjust the clock of the Hyundai Elite I20
How to adjust the clock of the Hyundai Elite I20
Hyundai I20 (2008-2014 / MK 1, PB) Today we will explain how to set the clock on the car radio of a first-generation Hyundai i20 vehicle. Turn on the car radio and press the setup cloc…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos