Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Features of the Hyundai Kona Limited Remote Control

Model: Hyundai Kona MK 2 - Years: 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

This video illustrates the almost futuristic features of the Hyundai Kona Limited remote control: at the bottom, there is a panic button, on the left is the unlock button, at the top is the normal lock, and on the right is the remote start button, which allows you to start the engine without being inside the vehicle.

On the side of the key fob, there is a button that opens the boot, releasing the tailgate; so far, everything is quite normal.

Then there are two buttons that allow the vehicle to move forward or backward in a straight line after starting it remotely, as long as you keep the button pressed.


Updated on 9 November 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Hyundai Kona remote control
How to replace the battery of the Hyundai Kona remote control
Hyundai Kona (2017-2023 / MK 1) Today we will see how to replace the battery of the Hyundai Kona key remote, using a CR 2032 battery. Press the button on the back of the remote to r…
How to replace the battery in the Hyundai Kona key remote.
How to replace the battery in the Hyundai Kona key remote.
Hyundai Kona (2017-2023 / MK 1) Today, we will see in this guide the procedure for disassembling and replacing the battery of the Hyundai Kona key remote. First, let's take our remo…
Replacement of the Hyundai Kona key remote battery
Replacement of the Hyundai Kona key remote battery
Hyundai Kona (2023-2026 / MK 2) Let's briefly see the instructions that will allow us to disassemble and replace the battery of the Hyundai Kona key remote. First, take our remote a…

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos