Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Hyundai Kona key remote.

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

Today, we will see in this guide the procedure for disassembling and replacing the battery of the Hyundai Kona key remote. First, let's take our remote and start by removing the physical key from inside it; we can leverage the slot created to open the remote into two parts, accessing the circuit board and the battery, as shown in the video.

At this point, we remove the old battery and replace it with a new one of the correct type (in this case, a CR 2032 3V); let's insert it in the correct orientation and reassemble all the parts of the remote.


Posted on 24 November 2025 by ScegliAuto


Related tutorials

How to replace the remote battery of a Hyundai Kona?
How to replace the remote battery of a Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) To replace the remote battery of a Hyundai Kona, lower the lever located at the top of the device. This will allow you to slide the key out from the …
How to Replace the Battery in a Hyundai Kona Remote
How to Replace the Battery in a Hyundai Kona Remote
Hyundai Kona (2017-2023 / MK 1) In this short and simple video tutorial, learn how to replace the battery in a Hyundai Kona key fob. First, extract the physical key from the remote …
How to Replace the Remote Battery in a Hyundai Kona?
How to Replace the Remote Battery in a Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) To replace the battery in the remote control of a Hyundai Kona, pull the lever located at the top of the device so that the key can be extracted from…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos