Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Bulbs in the Front Headlight of a Hyundai i10

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Headlight bulb

Let's replace the bulbs in the front headlight of a Hyundai i10. Here’s how to proceed: Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap of the headlight (located at the rear of the headlight) and remove it. Find the bulbs with the metal clips, pull the bulb holders out of the headlight, and extract the damaged bulbs using a screwdriver. Install the new bulbs (always ensure they are the correct type and size) and insert the bulb holder back into the headlight housing. Finally, close the headlight with the inspection cap and test the correct operation of the lights.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Hyundai I10
Replacing Headlight Bulbs on Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Are the bulbs in your Hyundai I10 damaged? Here’s how to change them inside the front headlight. Open the front bonnet by pulling the lever located a…
Replace the Front Headlamp Bulbs on Hyundai I10
Replace the Front Headlamp Bulbs on Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Want to replace the front headlamp bulbs on your Hyundai I10? Follow these steps: open the bonnet by pulling the lever located at the bottom right of…
How to Remove the Rear Light and Bulb of the Hyundai I10
How to Remove the Rear Light and Bulb of the Hyundai I10
Hyundai I10 (2013-2020 / IA, MK 2) In this brief guide, we will provide the necessary instructions to remove and replace the rear light and its bulbs on the Hyundai I10, following thes…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos