Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : Disassembly of the headlight on the Hyundai I10 MK1

Hyundai I10 - Video tutorial

Model: Hyundai I10 MK 1, PA - Years 2007-2013
Part: Headlight
Operation: Disassembly of the headlight on the Hyundai I10 MK1

Let's see in this short video how to remove the headlight and how to replace its bulbs on the Hyundai I10 first series, following these simple steps. First we open the bonnet of our car and start by removing the fixing screws of the headlight, which we find on the sides; to do this we use a Phillips screwdriver or better a socket wrench. Once the headlight has been removed, we can disconnect the electrical connector of the bulbs; then we remove any bulbs to replace. We just have to reassemble everything, applying the reverse procedure!


Posted on 29 February 2024 by ScegliAuto



How to replace the headlight bulb Hyundai I10
Hyundai I10 (2007-2013 / MK 1, PA) In this very simple video guide we will see how to remove the headlight bulb of a Hyundai I10. The disassembly operation takes a few minutes and is n
Disassembly of the front headlights of the Hyundai I10.
Hyundai I10 (2019-2024 / AI3, AC3) If we need to replace the bulbs or change the entire unit, let's see how to proceed with the disassembly of the front headlight of the Hyundai I10. O
How to change the headlight bulbs of a Hyundai I10
Hyundai I10 (2007-2013 / MK 1, PA) Are we having trouble with the headlight illumination of our Hyundai I10? Let's see in this video how to proceed with the replacement of the lighting

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos