|
Do it yourself
| |||
| ||||
How to replace the bulb of a front headlight of a Hyundai Tucson
Model: Hyundai Tucson
MK 3, TL
- Years:
2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
In the video we see how to replace the bulb of a front headlight of a Hyundai Tucson car. The first step to take is to get into the car and pull the lever that allows you to open the hood, then get out of the car, open the hood and secure it in place with the appropriate latch. At this point, locate the headlight for which you need to replace the bulb and remove the plastic cover behind it: to do this, simply rotate the piece counterclockwise. Once the cover is removed, you will have access to the bulb with its connector; remove the connector and disconnect the bulb, then proceed to replace it with the new one. Reposition all components as they were at the beginning.
Posted on 16 February 2025 by ScegliAuto
Related tutorials
Hyundai Tucson
(2004-2009 /
JM, MK 1)
In this guide, we will provide instructions to disassemble and replace the front headlight bulb on the Hyundai Tucson. First, open the bonnet and sta…
Hyundai Tucson
(2015-2021 /
MK 3, TL)
Today, you will learn how to replace the front headlight bulb on the Hyundai Tucson using an H7 bulb. To perform the bulb replacement, open the bonne…
Hyundai Tucson
(2015-2021 /
MK 3, TL)
To replace the front headlight bulb on the Hyundai Tucson, open the bonnet to access the engine bay. Next, remove the protective cap located at the r…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?
If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.060
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |