Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the Start & Stop system in the Hyundai I20?

Model: Hyundai I20 MK 2, GB, IB - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, we can see how to deactivate the Start & Stop feature in the Hyundai I20, an extremely simple and quick operation to be carried out, for example, if we find the system too intrusive. First of all, let's go inside the car, then insert the key and start the engine.

Next, locate the button with a circled "A" symbol, located in the central console right next to the handbrake lever, and press it. The blue LED turning on and the confirmation message appearing on the display will indicate that the system has been successfully deactivated.

However, this is not permanent and will need to be repeated at each vehicle start-up.


Posted on 21 February 2025 by ScegliAuto


Related tutorials

Hyundai I20 (2014-2021 / MK 2, GB, IB) In this tutorial, see how to disable the electronic traction control in the Hyundai I20, a very simple and quick operation to be performed only when …
Hyundai I20 (2008-2014 / MK 1, PB) Disconnecting the airbag located on the steering wheel of the Hyundai I20 is a straightforward task that can be done independently, aided by this bri…
Hyundai I20 (2014-2021 / MK 2, GB, IB) This tutorial shows how to disable the passenger airbag in the Hyundai I20, a very simple and quick operation that must be done after placing a rear-…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Spare Wheel on a Citroen C4 Grand Picasso

Today, in this short and simple guide, follow the steps to remove the spare wheel from the floor and replace it with the flat one on a Citroen C4 Grand Picasso. First, open the boot's tailgate and start by removing the upper shelf; then use the supplied key to unscrew the spare wheel bolt to remove it, as shown in the video. At this point, lift the vehicle with the jack and unscrew the wheel bolts, replacing it with the spare; then secure it with the bolts, tightening them in a cross pattern!

Watch the video!


by ScegliAuto

More videos