Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb

Model: Hyundai Veloster MK 1, FS - Years 2011-2018
Part: Headlight bulb

If you want to replace the front headlight bulb of your first series Hyundai Veloster on your own, all you have to do is carefully read all the steps described in our new guide and put them into practice. First of all, lift the front hood of the vehicle and position the safety support correctly. Then locate the protective cap located at the back of the headlight and remove it with your own hands. At this point, disconnect the electrical pin and immediately replace the faulty bulb with a new one that is perfectly compatible.

Posted on 4 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Installation of Aftermarket Xenon Bulb Accessory Kit
Installation of Aftermarket Xenon Bulb Accessory Kit
Hyundai Veloster (2011-2018 / MK 1, FS) Improving night visibility is always recommended, so obtain the necessary modification kit and proceed as follows. Remove the bumper and front grille…
Replacing Cabin Lights with LED Bulbs
Replacing Cabin Lights with LED Bulbs
Hyundai Veloster (2011-2018 / MK 1, FS) Replacing the cabin bulbs with LED ones will give the vehicle a much more appealing and modern look while also improving visibility; start with the f…
How to replace the engine air filter of the 2021 Hyundai Veloster N
How to replace the engine air filter of the 2021 Hyundai Veloster N
Hyundai Veloster (2019-2022 / JS, MK 2) In this new guide, we will explain to you the various steps you need to follow if you want to replace the engine air filter of your 2021 Hyundai Velo…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos