Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Interior lights replacement with LED bulbs

Model: Hyundai Veloster FS, MK 1 - Years 2011-2018
Part: Interior lights ceiling light bulb

Replacing the passenger compartment bulbs with LED ones will give the car a decidedly more attractive and modern look as well as improve visibility itself; start from the front ceiling light by releasing the glass with a plastic lever to access the lamp holder and replace the torpedo bulb: if it does not turn on, the bulb itself must be rotated 180 degrees, as the LEDs have a power supply polarity to be respected; then switch to the rear ceiling light with the same procedure and then to the rear hood light; finally, also replace the license plate lights (T10 attack).


Posted on 26 August 2023 by ScegliAuto



Aftermarket xenon bulb accessory kit installation
Hyundai Veloster (2011-2018 / FS, MK 1) Improving visibility at night is always recommended, so get the kit necessary for the modification and proceed as follows. Remove the bumper and fron
How to replace the cabin filter in Hyundai Veloster?
Hyundai Veloster (2011-2018 / FS, MK 1) Replacing the cabin filter of the Hyundai Veloster is an extremely simple and fast operation, let's see how to proceed in this tutorial. First of all
How to replace the gear knob on a Hyundai Veloster
Hyundai Veloster (2011-2018 / FS, MK 1) The accessories that are installed on a vehicle can say a lot about its owner. In today's video, we will see how to customize the gear knob of a Hyun

How to remove the telepass holder from the windshield

Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simple and quick operation to perform independently, you just need to use nylon thread that you will need to pull towards the holder and pass it between the holder and the clip. After performing this operation, the holder will be removed. There may be glue residues on the windshield that can be removed with a solvent suitable for glass cleaning. After cleaning everything, it is possible to mount another telepass holder on the windshield in the same position as the one removed or elsewhere.

Watch the video!


by ScegliAuto

More videos