Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Veloster
    4. : Aftermarket xenon bulb accessory kit installation

Hyundai Veloster - Video tutorial

Model: Hyundai Veloster FS, MK 1 - Years 2011-2018
Part: Xenon headlight kit
Operation: Aftermarket xenon bulb accessory kit installation

Improving visibility at night is always recommended, so get the kit necessary for the modification and proceed as follows. Remove the bumper and front bezel from the car. Disassemble the headlight assembly then remove the old bulbs. Using a cutter, modify the lamp holder to adapt it to the new lamp, practically the inside has to be removed to house the new lamp holder. Open the package of the new lamp by removing the packaging and absolutely without touching the glass bulb with your hands inserting the lamp into the lighthouse making the cables, the lamp must be mounted precisely and in the right direction. Connect the faston of the lamp in the connector and refit the hood to protect the headlight by making holes to install the cable glands. Then connect the new cables to the kit control unit. Secure the control unit in a place away from the engine heat using plastic ties. Check the perfect functioning and alignment of the headlights of the new installation.


Posted on 4 July 2023 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos