Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Reversing Camera in a Hyundai IX35?

Model: Hyundai ix35 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Accessory kit

Video tutorial

To replace the reversing camera on a Hyundai IX35, open the tailgate and remove the inner plastic panel to access the camera housing. Disconnect the electrical connector powering the camera.

Unscrew the screws or unclip the fasteners securing it to the tailgate and gently remove it. Insert the new camera into the same housing, securing it with screws or clips and reconnect the electrical connector. Reposition the inner panel and press until all clips snap into place.

Turn on the ignition and engage reverse gear to check that the camera functions correctly and transmits the image to the display.


Posted on 9 November 2026 by ScegliAuto


Related tutorials

Hyundai ix35 (2009-2015 / MK 1) Here’s how to fit the rear camera on a Hyundai Ix35. Remove the fastening plastics to replace or install the camera. Open the boot of the car, then r…
Hyundai ix35 (2009-2015 / MK 1) To remove and subsequently replace the external wing mirror on a Hyundai Ix35, simply leverage it from behind with your hands, pulling it out of its …
Hyundai ix35 (2009-2015 / MK 1) Resetting the tyre light on your Hyundai IX35 is very simple, and the procedure to carry out the operation is truly within anyone's reach. Let's find…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos