Do it yourself
Frequently asked questions about cars and motorcycles

Fitting Rear Camera on Hyundai Ix35

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Checks and maintenance

Here’s how to fit the rear camera on a Hyundai Ix35. Remove the fastening plastics to replace or install the camera. Open the boot of the car, then remove the inner trim of the tailgate by unscrewing the screws on the plastic trim with a screwdriver. Disconnect the number plate light and, if necessary, the handle plastic. Use a plastic lever to remove the internal trims of the vehicle (located between the bodywork and the plastic trim). Feed the wiring from the camera to the radio. Test the camera view once the installation is complete.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai ix35 (2009-2015 / MK 1) To remove and subsequently replace the external wing mirror on a Hyundai Ix35, simply leverage it from behind with your hands, pulling it out of its …
Hyundai ix35 (2009-2015 / MK 1) To replace the cabin filter on a Hyundai Ix35, open the glove compartment located on the passenger side. Once the glove compartment is open, detach t…
Hyundai ix35 (2009-2015 / MK 1) Do you want to remove the rear seat from a Hyundai Ix35? Here’s how to take off the seat base and the rear backrest. Remove the rear seat base: pull …

Other guides you may be interested in

    Frequently Asked Questions

    • Ix35 2009-2015 - What is the price of the new Hyundai Ix35? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos