Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Internal Handle of the Hyundai IX35

Model: Hyundai ix35 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Handle

Video tutorial

This guide shows how to replace the internal handle of the Hyundai IX35. For this operation, you need to remove the internal door panel by unscrewing the 5 internal fixing screws, then remove the trim covers of the handle and the wing mirror. Pull the edge of the panel from the bottom upwards and remove it. Unscrew the retaining screw of the handle and slide it out. At this point, you can install the new replacement part or repair the old handle, if possible, and reinstall it. By following the steps in reverse, you can reassemble the handle and the door panel in position.

Check for proper operation.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Hyundai ix35 (2009-2015 / MK 1) In this video, you will see how to remove the front panel of a Hyundai IX35: start by removing the internal cover of the rear-view mirror. Then remov…
Hyundai ix35 (2009-2015 / MK 1) Resetting the tyre light on your Hyundai IX35 is very simple, and the procedure to carry out the operation is truly within anyone's reach. Let's find…
Hyundai ix35 (2009-2015 / MK 1) To replace blown bulbs on a Hyundai Ix35, let's look at removing the front headlight. Open the front bonnet by pulling the lever located at the botto…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos