Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the key cover of the Hyundai I20?

Model: Hyundai I20 GB, IB, MK 2 - Years 2014-2021
Part: Key

Using the car key remote control every day and multiple times a day could eventually lead to the breaking of one or more buttons. However, with just a few euros and a few minutes, the problem can be easily solved. Let's get a small flathead screwdriver and open the new shell, making a cut in the joint after removing the key. Now let's do the same with the broken shell, extracting the circuit and the key, in order to install them inside the new cover. Once this is done, all that's left is to close the newly named cover and make sure everything works.

Posted on 22 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear headlight bulb of the Hyundai I20?
How do you replace the rear headlight bulb of the Hyundai I20?
Hyundai I20 (2008-2014 / MK 1, PB) The operation of replacing the rear headlight bulb of the Hyundai I20 is carried out by opening the rear hatch, so that it is possible to access the …
How to Replace the Cabin Filter on a Hyundai i20
How to Replace the Cabin Filter on a Hyundai i20
Hyundai I20 (2014-2021 / GB, IB, MK 2) To replace the cabin filter on a Hyundai i20, remove the plastic panel located on the side of the passenger footwell. Once this panel is detached, yo…
How do you replace the battery of the Hyundai I20?
How do you replace the battery of the Hyundai I20?
Hyundai I20 (2014-2021 / GB, IB, MK 2) To replace the battery on the Hyundai i20, you need to open the hood in order to access the components located inside the engine compartment: on the …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos