Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Hyundai Kona

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Battery

See other generations:
Video tutorial

The battery that we will install inside the Hyundai Kona is produced by Weize Platinum and sold by Amazon. It has a voltage of 12 volts and 60 amperes; this battery is sold with a 36-month warranty and costs $159.99, which is equivalent to 140.99€. To replace the battery, we need to open the front hood and unscrew the nuts on the negative connector block using a 10 mm wrench.

Using a 12 mm wrench, we unscrew the fastening element of the positive pole. We then remove the old battery and insert the new one in its place.

We connect the positive terminal and then the negative terminal. We start the car to test the battery's functionality.


Posted on 1 June 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Hyundai Kona remote control
How to replace the battery of the Hyundai Kona remote control
Hyundai Kona (2017-2023 / MK 1) .. Today we will see how to replace the battery of the Hyundai Kona key remote, using a CR 2032 battery. Press the button.. …
How to replace the battery of the Hyundai Kona remote control?
How to replace the battery of the Hyundai Kona remote control?
Hyundai Kona (2017-2023 / MK 1) .. In this tutorial we can see how to replace the battery of the Hyundai Kona remote control, an extremely simple and quick operation... …
How to replace the battery of the Hyundai Kona
How to replace the battery of the Hyundai Kona
Hyundai Kona (2023-2026 / MK 2) .. In this video we can see how to replace the battery of the Hyundai Kona: we open the hood and lift the plastic cover that protects.. …

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos