Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Hyundai Kona - Battery

Hyundai Kona (2017-2023 / MK 1)
Battery replacement for Hyundai Kona remote control.
These brief steps will show us how to disassemble and replace the battery of the key remote for the Hyundai Kona. First, we take our remote and start by …read all…
Posted on 4 May 2024 by ScegliAuto
Hyundai Kona (2017-2023 / MK 1)
Battery replacement for the Hyundai Kona
Today's guide will show us the main steps on how to disassemble and replace the battery of the electric motor of the Hyundai Kona; the replacement of the …read all…
Posted on 18 August 2023 by ScegliAuto
Hyundai Kona (2017-2023 / MK 1)
How to replace the battery in the Hyundai Kona
In this new guide of ours dedicated to your Hyundai Kona, we're going to find out how to replace the battery safely and quickly. Before starting, we remind you …read all…
Posted on 10 June 2023 by ScegliAuto
Hyundai Kona (2017-2023 / MK 1)
How to change the battery of the remote key in the Hyundai Kona
Below we will see the step-by-step instructions for disassembling and replacing the remote control battery of the Hyundai Kona key. First of all, we take our …read all…
Posted on 13 December 2022 by ScegliAuto
Car stereo (1) Battery (4) Key (10) -board computer (6) Checks and maintenance (32) Tail light (1) Fog lights (1) Air filter (2) Cabin air filter (2) Oil filter (1) Side turn signal light bulb (2) Headlight bulb (3) License plate light (1) Engine oil (3) Door panel (2) Instrument cluster (7) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos