Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Hyundai Kona
    4. : Headlight bulb

Hyundai Kona - Headlight bulb

Hyundai Kona (2017-2023 / MK 1)
Replacement of the front headlight bulb of the Hyundai Kona.
Today we will see the procedure that will allow us to disassemble and replace the headlight bulb of the Hyundai Kona. First, we open the engine hood and start …read all…
Posted on 15 August 2023 by ScegliAuto
Hyundai Kona (2017-2023 / MK 1)
How do you replace the headlight bulb of the Hyundai Kona?
To replace the headlight bulb of the Hyundai Kona, you need to access the cover located inside the corresponding wheel well of the bulb to be replaced. By …read all…
Posted on 3 May 2023 by ScegliAuto
Hyundai Kona (2017-2023 / MK 1)
How to replace a hyundai kona headlight bulb
Replacing the headlight bulb of your Hyundai Kona is a rather simple operation to carry out and thanks to the following mini guide you will be able to complete …read all…
Posted on 15 April 2023 by ScegliAuto
Car stereo (1) Battery (4) Key (10) -board computer (6) Checks and maintenance (32) Tail light (1) Fog lights (1) Air filter (2) Cabin air filter (2) Oil filter (1) Side turn signal light bulb (2) Headlight bulb (3) License plate light (1) Engine oil (3) Door panel (2) Instrument cluster (7) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos