Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Hyundai Kona?

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight bulb

See other generations:
Video tutorial

To replace the front headlamp bulb on a Hyundai Kona, access the cover located inside the wheel arch corresponding to the bulb to be replaced: by removing the rivet, you can lower this cover and then remove the circular cap beneath it. This will give you access to the bulb in its socket, which must be extracted and disconnected from the connector; then connect the new bulb to the connector, insert it back into the headlamp, and close everything with the circular cap and the cover inside the wheel arch.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to Replace the Right Front Headlamp Bulb on a 2020 Hyundai Kona
How to Replace the Right Front Headlamp Bulb on a 2020 Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Follow these simple steps to replace the right front headlamp bulb on a 2020 Hyundai Kona yourself. To perform the replacement, first, unscrew the co…
How to Replace the Front Headlight Bulb on the Hyundai Kona
How to Replace the Front Headlight Bulb on the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Replacing the front headlight bulb on your Hyundai Kona is a relatively simple task, and with the following mini guide, you will complete it without …
How to Replace the Bulb of a Hyundai Kona
How to Replace the Bulb of a Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) The steps to replace the left front headlamp bulb are simple and quick. The first step is to open the bonnet. The second step is to remove the wheel …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos