Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Kona
    4. : How to replace a hyundai kona headlight bulb

Hyundai Kona - Video tutorial

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Headlight bulb
Operation: How to replace a hyundai kona headlight bulb

Replacing the headlight bulb of your Hyundai Kona is a rather simple operation to carry out and thanks to the following mini guide you will be able to complete it without any difficulty. First you have to turn off the car. Immediately afterwards, reach for the front hood and lift it completely. Then unscrew the protective cap from the bulb holder and then go to the wheel arch area. Remove the cover in the upper part and proceed with the removal of the faulty bulb. Finally, all that remains is to fit the new replacement bulb and you are done.


Posted on 15 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos