Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear turn signal bulb of the Hyundai Kona

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Light bulb

See other generations:
Video tutorial

These short and simple steps will show us how to disassemble and replace the rear turn signal bulb of the Hyundai Kona. First, we open the rear door of the trunk and start unscrewing the fixing screws of the rear light; then we unscrew the screws of the wheel arch to release the bumper and then the light, disconnecting and removing the bulb holder along with the turn signal light, as shown in the video.

At this point, we replace and install the new bulb, having the same attachment; we check its operation and finally reassemble the light!


Posted on 23 August 2025 by ScegliAuto


Related tutorials

How to Replace the Bulbs in the Lower Rear Indicator on Hyundai Kona
How to Replace the Bulbs in the Lower Rear Indicator on Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Remove the plastic panel covering the lower rear light (if present) using a screwdriver. Once the cover is removed, disconnect the bulbs (using plier…
Removing the Rear Spoiler from a Hyundai Kona
Removing the Rear Spoiler from a Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Today, you will learn how to remove the rear spoiler from a Hyundai Kona. First, open the boot and manually detach the upper plastic panel; then disc…
How to Reset the "Service" Light on a Hyundai Kona?
How to Reset the "Service" Light on a Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) Hello, this guide aims to reset the "Service" light on your Hyundai Kona. Start the vehicle's instrument panel by pressing the ignition button. Using…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos