Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs in the Lower Rear Indicator on Hyundai Kona

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Side marker bulb

Remove the plastic panel covering the lower rear light (if present) using a screwdriver. Once the cover is removed, disconnect the bulbs (using pliers) located in the metal or plastic bulb holder (at the back of the rear light). Replace the damaged bulbs with new ones of the same size and voltage, preferably of good quality. Finally, refit the inspection cover of the light and check the operation of the replaced bulbs.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front turn signal bulb of the Hyundai Kona.
Replacement of the front turn signal bulb of the Hyundai Kona.
Hyundai Kona (2023-2026 / MK 2) In this guide, we will discover the steps that will allow us to dismantle and replace the front turn signal bulb of the Hyundai Kona. To replace the …
How to replace the rear turn signal bulb of the Hyundai Kona
How to replace the rear turn signal bulb of the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) These short and simple steps will show us how to disassemble and replace the rear turn signal bulb of the Hyundai Kona. First, we open the rear door …
How to Replace the Indicator Bulb on a Hyundai Kona
How to Replace the Indicator Bulb on a Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Replacing the indicator bulb on a Hyundai Kona is a straightforward task that you can do yourself. Start by opening the bonnet, turning the wheel inw…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos