Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Hyundai Kona
    4. : Door panel

Hyundai Kona - Door panel

Hyundai Kona (2017-2023 / MK 1)
Disassembly of the door panel of the Hyundai Kona.
Today we will discover the guide and instructions that will allow us to disassemble and replace the front door panel of the Hyundai Kona. First, we open the …read all…
Posted on 4 April 2023 by ScegliAuto
Hyundai Kona (2017-2023 / MK 1)
Removing the door panel on Hyundai Kona
To begin, remove the plastic protector on the front door pillar next to the window. Now unscrew the small bolt on the back of the window control panel. You …read all…
Posted on 1 February 2024 by ScegliAuto
Car stereo (1) Battery (4) Key (10) -board computer (6) Checks and maintenance (32) Tail light (1) Fog lights (1) Air filter (2) Cabin air filter (2) Oil filter (1) Side turn signal light bulb (2) Headlight bulb (3) License plate light (1) Engine oil (3) Door panel (2) Instrument cluster (7) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos