Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of the Hyundai Kona

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Door trim panel

The steps to remove the rear door panel of the Hyundai Kona are: - remove the cover of the window switch panel; - unscrew the screw at the bottom; - remove the triangular upper cover of the door; - unscrew the side screws; - release the panel; - disconnect the connector; - remove the panel completely; For the removal of the right rear panel, we follow the same steps; the same steps can be applied to the removal of the front panels. This operation is also valid for almost all new generation Hyundai models.

Posted on 29 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel on the Hyundai Kona
Removing the Door Panel on the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Today, we will look at the guide and instructions for removing and replacing the front door panel on the Hyundai Kona. First, open the front door and…
How do you reset the tire pressure light of the Hyundai Kona?
How do you reset the tire pressure light of the Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) In order to reset the tire pressure light of the Hyundai Kona, you need to inflate the tires until they reach the recommended pressure value: this va…
Removing the Door Panel on Hyundai Kona
Removing the Door Panel on Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) To start, remove the plastic cover on the front pillar of the door, next to the window. Now, unscrew the small bolt located at the back of the window…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos