Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery of the Hyundai Kona

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Battery

See other generations:
Video tutorial

Today's guide will show you the main steps to remove and replace the electric motor battery of the Hyundai Kona; the replacement should be carried out by an authorised workshop, as there are high voltages that could cause damage. First, open the bonnet and start disconnecting the connector located at the top left; remove the rear seat and disconnect the main battery connectors, as shown in the video.

At this point, lift the vehicle to remove the battery supports, being careful of the high-voltage cables; lower the battery using the appropriate jack, replacing it with the new one!


Updated on 12 August 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery in a Hyundai Kona?
How to Replace the Remote Battery in a Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) To replace the battery in the remote control of a Hyundai Kona, pull the lever located at the top of the device so that the key can be extracted from…
Replacing the Key Fob Battery on a Hyundai Kona
Replacing the Key Fob Battery on a Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) These brief steps will guide you on how to disassemble and replace the battery in the key fob for a Hyundai Kona. First, take the key fob in hand and…
Guide to Replacing the Key Fob Battery for the Hyundai Kona
Guide to Replacing the Key Fob Battery for the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Let’s look at the steps to disassemble and replace the battery in the key fob for the Hyundai Kona. First, take the key fob in hand and remove the ph…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos