Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure monitoring system light in the Hyundai I20?

Model: Hyundai I20 GB, IB, MK 2 - Years 2014-2021
Part:

In the images of the video below, the tire control system of the Hyundai I20 is displayed, indicating the inflation pressure of each tire. If an insufficient value is detected, a warning light will be triggered. We should immediately stop to check and, if only inflation is needed, inflate the tire properly. Otherwise, we should go to the workshop for further checks. Only when the inflation pressure is equal to the values ??established by the manufacturer, we can reset the alarm by pressing the Set button on the left side of the steering wheel, on the dashboard.

Posted on 13 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Hyundai I20?
How do you reset the tire pressure light on the Hyundai I20?
Hyundai I20 (2020-2026 / BC3, MK 3) It will be possible to make the tire pressure warning light of the Hyundai I20 disappear completely by inflating the tires to the optimal pressure va…
How to Reset the Service Light on a Hyundai i20
How to Reset the Service Light on a Hyundai i20
Hyundai I20 (2014-2021 / GB, IB, MK 2) To reset the service light on your Hyundai i20, simply follow this procedure. All you need to do is sit in the driver's seat inside the cabin and sta…
How to Reset the Tyre Pressure Light on a Hyundai i20?
How to Reset the Tyre Pressure Light on a Hyundai i20?
Hyundai I20 (2020-2026 / BC3, MK 3) To reset the tyre pressure light on the Hyundai i20, first inflate the tyres to the pressure values indicated on the sticker attached to the driver's…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos