Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Electric Handbrake Button on the Hyundai I30

Model: Hyundai I30 PD, MK 3 - Years 2016-2024
Part: Parking brake

Below are the instructions to dismantle and replace the electric handbrake button on the Hyundai I30. First, get inside the vehicle and start by removing the gear knob and gaiter; then you can remove the central tunnel cover, gaining access to the electric handbrake button. At this point, disconnect the electrical connector to remove and replace the button with the new original one; reconnect it and reassemble all the elements of the central tunnel, checking the operation of the handbrake!

Posted on 1 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Handbrake on a Hyundai I30
How to Adjust the Handbrake on a Hyundai I30
Hyundai I30 (2016-2024 / PD, MK 3) In this guide, learn how to adjust the handbrake on your Hyundai I30. Use a screwdriver to remove the cover inside the armrest to access the screws, …
Resetting the Service Light on the Hyundai i30
Resetting the Service Light on the Hyundai i30
Hyundai I30 (2011-2016 / MK 2, GD) Once you have changed the engine oil on the Hyundai i30, proceed to reset the system that alerts you to the need for maintenance. Sit in the driver's…
How to reset the service light on a Hyundai I30
How to reset the service light on a Hyundai I30
Hyundai I30 (2011-2016 / MK 2, GD) The video tutorial in question shows the procedure to follow in order to reset the service light of a Hyundai I30 car. First of all, get into the car…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos