Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Hyundai ix20

Model: Hyundai ix20 OJ - Years 2010-2019
Part: Tire pressure warning light

This guide shows how to reset the tyre pressure warning light on the vehicle. The first step is to start the engine. Now, on the steering wheel, press the "trip" button until the display shows "Service in" or "Service". At this point, hold the "reset" button for four seconds until the message "Hold RESET: reset" appears; then, after releasing the button, press it again for another two seconds. The operation is now complete and the tyre pressure warning light has been turned off.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Turn Off the Tyre Pressure Warning Light on a Hyundai IX20?
How to Turn Off the Tyre Pressure Warning Light on a Hyundai IX20?
Hyundai ix20 (2010-2019 / OJ) When the tyre pressure warning light illuminates on a vehicle, it means that the inflation pressure is incorrect, being lower than expected, thus tri…
How to reset the service light on a Hyundai Ix20
How to reset the service light on a Hyundai Ix20
Hyundai ix20 (2010-2019 / OJ) If you have replaced the engine oil on this model of car from the Korean manufacturer, you need to complete the job by resetting the service light th…
How to Reset the Service Light on a Hyundai IX20?
How to Reset the Service Light on a Hyundai IX20?
Hyundai ix20 (2010-2019 / OJ) As we can see in this tutorial, resetting the service light on a Hyundai IX20 is a very simple and quick operation. Before proceeding, ensure that al…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos