Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I30
    4. : How to replace the wing mirror in Hyundai I30?

Hyundai I30 - Video tutorial

Model: Hyundai I30 PD, MK 3 - Years 2016-2023
Part: Outside rearview mirror
Operation: How to replace the wing mirror in Hyundai I30?

As we can see in this short tutorial, replacing the door mirror in your Hyundai I30 is an extremely simple and fast operation. First of all, go inside the passenger compartment, then, possibly using a plastic spatula so as not to leave marks, disengage the internal panel by levering around the perimeter. Once this is done, we disconnect the regulator connector, unscrew the three fixing bolts with a socket wrench and separate the mirror from the door. To fit the spare part, simply follow the reverse procedure.


Posted on 16 April 2023 by ScegliAuto



Remove the mirror from the Hyundai I30
Hyundai I30 (2007-2012 / FD, MK 1) Do we want to replace the mirror from inside the car mirror? Let's see how the mirror of the Hyundai I30 is removed. We pry between the perimeter of
How to replace the rear view mirror on a Hyundai I30
Hyundai I30 (2007-2012 / FD, MK 1) We see in this video tutorial the main instructions on how to remove and replace the external rearview mirror on a Hyundai I30 first series. First we
Guide to replace the outside rearview mirror on the Hyundai I30
Hyundai I30 (2007-2012 / FD, MK 1) Let's see in this short video the steps that will allow us to disassemble and replace the exterior rearview mirror on the Hyundai I30 first series, f

    Frequently Asked Questions

    • I30 2016-2023 - How to replace the exterior mirrors on the Hyundai I30? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos