Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I30
    4. : How to replace the bulbs of the central ceiling light of the Hyundai I30.

Hyundai I30 - Video tutorial

Model: Hyundai I30 PD, MK 3 - Years 2016-2023
Part: Checks and maintenance
Operation: How to replace the bulbs of the central ceiling light of the Hyundai I30.

In this video, we will see how to replace the bulbs of the central ceiling light of the Hyundai I30: first, we open the sunglass compartment; then, using a Phillips screwdriver, we unscrew the two screws inside. This will allow us to remove the entire ceiling light from its housing. We disconnect the electrical connector and from the top of the ceiling light, we can remove the two bulbs with their plastic bulb holders. We replace the bulb by inserting the new one into the bulb holder and then repositioning the assembly in its place, always working from the top of the ceiling light. We reconnect the electrical connectors and reposition the ceiling light in its place. We put the two screws back into their housing and tighten them. We close the sunglass compartment and the job is done.


Posted on 16 January 2024 by ScegliAuto

    Frequently Asked Questions

    • I30 2011-2016 - What are the problems with the Hyundai I30 Wagon? Read Answer
    • I30 2007-2012 - How to fix a Hyundai I30 steering column problem? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos