Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs in a Hyundai i30

Model: Hyundai I30 MK 1, FD - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the front headlight bulbs in a Hyundai i30, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure the key is not in the ignition for safety.

Start by opening the bonnet, then go to the relevant headlight and remove the cap located at the back. Next, disconnect the power connector, unlock the metal clip, and extract the bulb from its housing.

At this point, insert the replacement, avoiding direct contact with the glass using bare hands, and reassemble everything by following the reverse procedure.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to replace the front headlight bulbs in the Hyundai i30?
How to replace the front headlight bulbs in the Hyundai i30?
Hyundai I30 (2007-2012 / MK 1, FD) In this tutorial, see how to replace the front headlight bulbs in the Hyundai i30, a very simple and quick operation. First, ensure the key is not in…
How to replace the front headlight bulbs in the Hyundai I30?
How to replace the front headlight bulbs in the Hyundai I30?
Hyundai I30 (2007-2012 / MK 1, FD) In this tutorial we can see how to replace the front headlight bulbs in the Hyundai I30, a very simple and quick operation. First of all, make sure t…
How to replace the headlights bulbs of a Hyundai I30 MK2
How to replace the headlights bulbs of a Hyundai I30 MK2
Hyundai I30 (2011-2016 / GD, MK 2) Let's see how to change the headlight bulbs of a Hyundai I30: access the engine compartment and locate the back of the headlight where we need to cha…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos