|
Do it yourself
| |||
| ||||
How to Replace the Headlight Bulb on the Hyundai Tucson
Model: Hyundai Tucson
MK 3, TL
- Years:
2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
Here are the necessary steps to replace the dipped beam bulb in the front headlight of the Hyundai Tucson. First, open the bonnet and remove the plastic cover protecting the bulbs; then disconnect the electrical connector while also pulling out the bulb holder and light, as shown in the video. At this point, remove and replace the dipped beam bulb with a new one of the correct type and fitting; check its operation before refitting the plastic cap, securing it properly on the headlamp unit!
Updated on 15 September 2026 by ScegliAuto
Related tutorials
Hyundai Tucson
(2004-2009 /
JM, MK 1)
The following steps will show you how to remove and replace the front headlamp bulb on the Hyundai Tucson. First, open the bonnet of the vehicle and …
Hyundai Tucson
(2015-2021 /
MK 3, TL)
Through these steps, you will see how to remove and replace the front headlamp bulb on the Hyundai Tucson. First, open the bonnet of the vehicle and …
Hyundai Tucson
(2015-2021 /
MK 3, TL)
These short and simple steps will show us how to disassemble and replace the headlight bulb of the Hyundai Tucson. First, we open the hood of the car…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?
If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.067
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |